Service And Maintenance - Antari AF-4 Mode D'emploi

DMX Operation
Making the DMX Connection – Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 5-pin XLR connector for DMX connection.
DMX Channel Function
Channel Mode
1

Service and Maintenance

Do not allow the machine to become contaminated.
․
Remove dust from air vents with air compressor, vacuum or a soft brush.
․
Excessive dust, liquid and dirt built up will degrade performance and cause
․
overheating.
Pin
1
2
3
4
5
Channel
1
Function
Ground
Data-
Data+
N/A
N/A
Value
0-5
6-255
10
Function
Off
Fan 20-100%