Mitsubishi Electric CITY MULTI PAR-40MAAU Manuel D'utilisation page 37

5
Operation pattern setting screen will appear.
Press the button to move the cursor to the desired
F1
pattern number.
Move the cursor to the time, On/Off, or temperature
with the F2 button.
Change the settings with the
Time: settable in 5-minute increments
•
* Press and hold the button to rapidly advance the
numbers.
On/Off/Auto: Selectable settings depend on the model of
•
Temperature: The settable temperature range depends on
•
preset temperatures can be set. If an operation pattern
with a single preset temperature setting is executed during
the cooling temperature setting in the Cool mode.
Press the SELECT button to save the settings.
A confirmation screen will appear.
Navigating through the screens
To go back to the setting change/day of the week selection
screen .............................................
To go back to the Main menu .........
To return to the previous screen .....
will appear on the Main display in the Full mode
when the weekly timer setting for the current day
exists.
The icon will not appear while the On/Off timer is
enabled or the system is under centralized control
or button.
F3 F4
/
button
SELECT
button
MENU
RETURN button
37