General Safety Instructions; Warnings For Installation - Erreka VIVO-D102 Manuel De L'installateur

GENERAL SAFETY INSTRUCTIONS

The device may be used by children aged 8
and over and by persons with reduced
physical, sensory or mental abilities, or a lack
of experience and knowledge, whenever they
have adequate supervision or training.
Children must not be allowed to play with the
device.
The device must not be cleaned or maintained
by children unless supervised.
A means of disconnection must be fitted for
t h e f i x e d i n s t a l l a t i o n , w i t h a c o n t a c t
separation in all poles that allows complete
disconnection under overvoltage category III,
in accordance with installation regulations. Its
specific characteristics (rated current, voltage,
etc.) must be suitable for the installation and
the elements used.
The device must be attached to its support, as
described in the "Securing the elements"
section of this guide.
The device's trade name is shown on the cover
of this guide. The manufacturer's full address
is shown on the back cover of this guide.
The operator type or model reference is
shown in the "Control board features"
section of this guide.
Proper use of the device is set out under
"Envisaged use". Any use other than that
described in the guide is considered improper
and forbidden, as it could result in injury and
damage to property.
The name of the device is shown in the
"Control board features" section of this
guide.
WARNING: Important safety instructions.
Follow all instructions, as improper installation
can result in serious injury.
The device weighs less than 20 kg, meaning
handling equipment is not required.
30
Installation Manual
WARNINGS
WARNING: Important safety instructions.
These instructions must be followed in order
to guarantee the safety of people. Keep these
instructions in a safe place.
W A R N I N G : T h e d e v i c e s h o u l d b e
disconnected from its power source during
cleaning, maintenance, and when replacing
parts.
Do not allow children to play with the device
or its controls, including remote controls.
The mode indicators are explained in the
section "Functioning modes" and "Display"
sections of this guide.
Details on how to use any manual release
device, or a reversible operator used as a
manual release device, are shown in the
instructions manual for the operator in
question.
Keep people away from the facility while the
maintained action switch is operating.
The user must NOT readjust the controls; this
must be left to a qualified professional.
Frequently inspect the installation for any
imbalance or signs of wear or deterioration of
the cables, springs and assembly. Do not use
the device if any repairs or adjustments are
required.
The A-weighted emission sound pressure level
of the device is equal to or less than 70 dB(A):
LpA <=70dB(A).

WARNINGS FOR INSTALLATION

The required installation components are
shown in the "Elements of the complete
installation" section. Details and instructions
for all the components can be found at the
website www.erreka-automation.com.