Symbols Used In This Manual; Importance Of This Manual; Envisaged Use; Installer's Qualifications - Erreka VIVO-D102 Manuel De L'installateur

GENERAL SAFETY INSTRUCTIONS
1

SYMBOLS USED IN THIS MANUAL

This manual uses symbols to highlight specific texts. The
functions of each symbol are explained below:

Failure to respect the safety warnings could
lead to accident or injury.

Work sequences or procedures.
2

IMPORTANCE OF THIS MANUAL


Read this guide in its entirety before carrying
out the installation, and obey all instructions.
Failure to do so may result in a defective
installation, leading to accidents and failures.
3

ENVISAGED USE

This device has been designed for installation as part of
an automatic opening and closing system for doors and
gates.

This control board must be installed indoors
(the box is not seal tight).
4

INSTALLER'S QUALIFICATIONS


Installation
professional installer, complying with the
following requirements:
• He/she must understand the general and
specific rules on safety and preventing
accidents.
• He/she must be capable of carrying out
mechanical assemblies in doors and gates,
choosing and implementing attachment
systems in line with the assembly surface
(metal, wood, brick, etc) and the weight and
effort of the mechanism.
• He/she must be able to carry out electrical
installations in accordance with the low
voltage regulation and the applicable or
relevant standards, rules and instructions,
and to recognise the dangers of electricity.
32
Installation Manual
should be completed

Important details which must be respected for
correct assembly and operation.

Additional information to help the installer.
}
Information on care for the environment.

Moreover, this guide provides valuable information
which will help you to carry out installation more
efficiently.

This manual is an integral part of the product. Keep
for future reference.

This device is not suitable for installation in
inflammable or explosive environments.

Failure to install or use as indicated in this
manual is inappropriate and hazardous, and
could lead to accidents or failures.

The installer shall be responsible for ensuring
the facility is set up for its envisaged use.

by a Installation should be carried out bearing in
mind standards
EN 12453:2017 and EN 12635:2002 +A1:2008.

CAUTION: According to European legislation,
automated
comply with the harmonised standards laid
down by the current Machinery Directive in
order to declare the conformity of the facility.
Connection
commissioning
product may only be carried out by a qualified,
competent technician.
EN 13241:2003 +A2:2016,
mechanism installations
to the mains,
and maintenance
must
testing,
of the