Gebruiksaanwijzing
SET
• SET: power on, select, confirm
•
: Up
•
: Down
• Prior to first use, make sure the battery is inserted, and the insulating strip is taken out.
Pay attention to correct polarization.
• Put the scale on even, stable, flat floor.
• Under the weighing condition, when the display show "0.0" you can press "UNIT" on the
back of the scale to choose units (kg, st, lb).
MEASURING WEIGHT, BODY FAT, HYDRATION PERCENTAGE
Weight:
1. Stand on the scale erectly and maintain your balance. Display will indicate your weight.
2. After weighing, the scale will automatically turn off if no further using.
SETTING AND STORING PERSONAL DATA IN MEMORY
Set personal data
1. Press SET key. Use
reach the personal key you wish to use, press SET to confirm.
Hint: The digital P0-P9 represents each of 10 users. Remember this number for future reference.
2. Press
or
to choose male
the screen and then press SET to confirm.
3. Press
or
to choose age (10-80), press SET to confirm.
4. Press
or
to choose height (100-240), press SET to confirm.
Measuring weight, body fat, hydration percentage
1. Stand bare foot on scale, maintain contact with electrodes.
2. Your weight will be display first.
3. Continue to stand erectly; the screen will display measurements sequentially (fat
percentage, hydration (TBW – total body water percentage), muscle percentage, bone
weight, BMI, minimum daily calories requirement)
BUTTONS
OPERATION
or
key to select your personal user's number (p0-p9). Once you
or female
when the gender symbol flashes on
29
NL