Control Panel; Super Function; Switching On/Off; Temperature Regulation - Electrolux GT316 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

68
www.electrolux.com
Handle
1
Basket
2

Control panel

3
5. CONTROL PANEL
5.1 Control panel
1
Temperature indicator
1
SUPER indicator
2
SET button
3
OFF button
4
Running indicator
5

5.2 Switching ON/OFF

1. To switch on the appliance insert the
plug into the mains socket.
2. If the indicators are off, press the
OFF button for 3 seconds.
3. To switch off the appliance, press the
OFF button for 3 seconds.

5.3 Temperature regulation

To set the temperature:
1. Press SET button repeatedly until
you reach the desired temperature.
The recommended
temperature is -18°C.
2. The temperature sets 5 seconds after
the last press.

6. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.

6.1 Cleaning the interior

Before using the appliance for the first
time, the interior and all internal
2
5
Outer drain plug
4
Wheels
5
The exact setting should be chosen
keeping in mind that the temperature
inside the appliance depends on:
3
• room temperature
• how often the lid is opened
• the quantity of food stored
• the location of the appliance.
If the appliance is used in an ambient
temperature between +10°C and -15°C,
the thermostat should be set to the
coldest temperature (-22°C) to allow the
4
compressor to work properly.

5.4 SUPER function

The SUPER function accelerates the
freezing of fresh food and, at the same
time, protects already stored foodstuffs
from undesired warming.
To activate the function:
1. Press SET button repeatedly until the
SUPER indicator lights up.
2. The function sets 5 seconds after the
last press.
The SUPER function stops automatically
after 52 hours and the temperature goes
back to the previous setting.
You can stop the function manually
before that time, by pressing the SET
button and setting the desired
temperature.
5.5 Running indicator
This indicator is on when the compressor
operates and it turns off when the
compressor stops working.
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.

Publicité

Table des Matières
loading

Table des Matières