Installation; Securing The Generator - Dometic TEC40D Instructions De Montage

TEC40D
9

Installation

!
CAUTION! Beware of injury
The generator may only be installed by qualified personnel from a
specialist company. The following information is intended for
technicians who are familiar with the guidelines and safety pre-
cautions to be applied.
9.1 Note on installation
Read the installation manual carefully before you install the generator.
When installing the generator, note the following:
D
DANGER! Danger of electrocution
Disconnect all power supplies when working on the generator.
!
CAUTION! Beware of injury
 Improper installation of the generator can result in irreparable
damage to the device and put the safety of the user at risk.
 Always wear the recommended protective clothing (e.g. pro-
tective goggles, gloves).
9.2

Securing the generator

Note on installation location
 Make sure that no combustible objects are stored or installed near the air
outlet or the ventilation slots. A distance of at least 70 cm should be kept.
 For safety reasons, note the location of existing wiring harnesses, wires
and other components within the installation area, in particular those
which are not visible, when installing the generator (when drilling or
screwing etc.).
 Leave a space of at least 70 mm between the generator hood and sur-
rounding parts so that sufficient space remains for cooling air to pass
through.
 For internal installation, you need to prepare a sealed compartment
against the vehicle interior which can also be insulated against sound.
Attach exhaust openings to the floor.
EN
Installation
17