Aux-In Connection - Bigben Interactive TD104 Mode D'emploi

NOT E: As some kinds of records have an auto-stop area outside of the unit setting, it w ill stop before
the last track finishes. In this case, change the Auto-Stop sw itch (23) to the "Off" position. Then it w ill
run to the end of the record but will not stop automatically. (Turn off the unit using the power button
or switch the Auto-Stop switch (23) back to the "On" position to stop the platter rotating). Then put the
tone arm back in the rest position.
NOT E: Due to Aux and Phono being designed in the same position on this system. When a 3.5mm
plug is plugged in to the Aux in jack (18) , the channel w ill change to Aux automatically and the
turntable will stop rotating. Please ensure the Aux in jack (18) has nothing plugged in before playing
the record player.

Aux-in connection

Connect the unit to another device by connecting the Aux in jack (18) using a 3.5mm cable (provided) and
connect the other end to the external device such as a Discman/MP3 player to perform the music playback or
encoding function etc.
1. Slide the Function knob (7) to the Phono/Aux position.
2. Adjust the Pow er ON-OFF/ Volume Control knob (16) to the desired volume level.
3. Start to play your external device.
Playback of MP3 songs via USB storage media connection
The system is able to decode and playback any MP3 file stored on memory media w ith the USB
connection port.
Please note that only the USB keys w ith format FAT32 and under a capacity of 16Gb can be read by
the unit.
1. Turn the Function knob (7) to USB or SD mode.
2. Plug-in the USB w ith the face up and make sure it is fully inserted or insert the memory card in the
direction of the arrow as shown in the label on the top.
Connecting the USB upside down or backwards could dam age the audio system or the storage
media. Check to m ake sure the direction is correct before connecting.
3. The system w ill start reading and playing back the file in the storage media automatically after
connecting and the Play LED indicator (14) will light up.
Note: The USB port does not support connection to a USB extension cable and is not designed
to communicate directly with a computer.
Play / Pause / Stop mode
1. To interrupt, press the "Play/Pause/Stop" button (13) once, the Play LED indicator (14) will flash.
Press again to resume normal playback.
2. If you press and hold the "Play/Pause/Stop" button (13) for two seconds during playback mode,
the system will go into stop mode.
3. To start playback again, press the "Play/Pause/Stop" button (13) to start playback, the fi r st track
will start playing and the Play LED indicator (14) w ill light up.
Skip/Search mode (skip/search up
1. During play or pause mode, if the "Skip Up" button (1) is pressed, it w ill go to the next track and
then remain in play or pause mode.
2. During play or pause mode, if the "Skip Dow n" button (1) i s pressed, it will go back to the beginning
of the track and remain in play or pause mode.
3. After step 2, pressing the "Skip Down" button (1) again w ill go to the previous track and remain the
play or pause mode.
4. If you press and hold the "Skip Up/Dow n" button (1) during playback, the track playing will fast
forward or rew ind until the button is released.
/
/ skip/search down
- EN 5 -
)