Behringer EUROPOWER PMP2000D Guide Rapide page 11

20 EUROPOWER PMP2000D
Specifi cations
Mic Inputs
Type 9 x XLR, electronically balanced discrete input circuit, channels 1 - 12
Mic E.I.N. (20 Hz to 20 kHz)
@ 0 Ω source resistance -108 dB / -110 dB A-weighted
@ 50 Ω source resistance -108 dB / -110 dB A-weighted
@ 150 Ω source resistance -106 dB / -107 dB A-weighted
Frequency response (-1 dB) <20 Hz to 22 kHz (-1 dB)
Frequency response (-3 dB) <20 Hz to 35 kHz (-3 dB)
Max. input level +13 dBu with PAD
Impedance 1.5 kΩ, balanced
Signal-to-noise ratio 98 dB / 100 dB A-weighted (-15 dBu In @ +35 dB gain)
Distortion (THD+N) 0.002%, A-weighted
Pad -25 dB, channels 1 - 6
Phantom power +48 V, switchable
Hi-Z / Line Inputs
Type 4 x ¼ " TRS, balanced, channels 1 - 4
Impedance 1.8 MΩ balanced, 1 MΩ unbalanced
Max. input level +22 dBu
Wireless Input
USB dongle (not included) USB socket accepts signals from max. 2 BEHRINGER ULM microphones
Signal indicator LED 2 (green)
Mono Line Inputs
Type 2 x ¼ " TRS, balanced, channels 5 and 6
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Max. input level +22 dBu
Stereo Line Inputs
Type 6 x ¼ " TRS connector, balanced channels 7 - 12
Impedance 20 kΩ balanced, 10 kΩ unbalanced
Max. input level +22 dBu
2-Track / Line In
Type 2 x RCA, unbalanced, channels 13 and 14
Impedance 20 kΩ unbalanced
Gain range -∞ dB to +20 dB
Max. input level +22 dBu
Channel EQ
Low ±15 dB @ 60 Hz
Mid ±15 dB @ 700 Hz
High ±15 dB @ 6 kHz
Aux In
Type 1⁄8" TRS connector, unbalanced
Impedance 10 kΩ
Gain range -∞ dB to +20 dB
2-Track / Line Out
Type 2 x RCA, unbalanced
Impedance 2.4 kΩ
Max. output level +9 dBu
Graphic Equalizers
Type analog 9-band equalizer
Frequency range 20 Hz to 20 kHz in 9 1-octave bands (ISO frequencies)
Bandwidth 1 octave
Control range ±12 dB
Low Cut
Type 18 dB/oct., Butterworth, channels 1 – 6
Frequency 100 Hz
Main Mix System Data (Noise)
Main mix @ -∞, channel fader @ -∞ -59 dBu / -59 dBu A-weighted
Main mix @ 0 dB, channel fader @ -∞ -56 dBu / -56 dBu A-weighted
Main mix @ 0 dB, channel fader @ 0 dB -56 dBu / -56 dBu A-weighted
Power Amp Specifi cations
Maximum output power
Both channels driven
8 Ω per channel 500 W*
4 Ω per channel 1000 W*
Bridged mode
8 Ω 2000 W*
Loudspeaker Connections
Connectors 2 x professional twist-locking speaker connectors
Load Impedance
Left / monitor Min. 4 Ω
Right / mono Min. 4 Ω
Bridge Min. 8 Ω
Power Supply / Voltage (Fuses)
USA / Canada 120 V~, 50/60 Hz (T 8 A H 250 V)
Japan 100 V~, 50/60 Hz, 8 A (T 8 A H 250 V)
UK / Australia / Europe/Korea / China 220-240 V~, 50/60 Hz (T 5 A H 250 V)
Power consumption @ 4 Ω, 1/8 rated power 180 W
Mains connection Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) 276 x 455 x 250 mm (10.9 x 17.9 x 9.8")
Weight 9.0 kg (19.8 lbs)
*Independent of limiters and driver protection circuits
Quick Start Guide 21