How To Clear Programs - Toshiba TCB-EXS21TLE Mode D'emploi

915_TCB-EXS21E.book Page 18 Wednesday, August 1, 2007 1:26 AM

How to Clear Programs

Press the PROGRAM button.
To cancel specific days
• Select a day to cancel using the DAY button
and press the CLEAR button. All settings in
programmed operations
cleared. The display appears as shown above.
• Press the PROGRAM button to enter the clear
operation. The normal display returns without
the program schedule marker (
the days of the week.
18
• When the PROGRAM button is pressed, the group No. and the
present day of the week start blinking and the present time
indication changes to a blinking "PG-1".
• Press the GROUP button to select a group to clear.
NOTE
• Group selection may be disabled during installation. If so,
proceed to the next step.
• Holding down the CANCEL button for more than 2 seconds
returns the program to the point prior to pressing the PROGRAM
button. (All operations made up until that point are cleared.)
through are
) underneath
To cancel individual programs on specific days
• Select a day and press the SET button.
Programmed operations
blinking in rotation, therefore press the CLEAR
button when the programmed operation to clear
starts blinking. (The remaining programmed
operations are automatically arranged in the
order of earliest time first.)
• Press the PROGRAM button to enter the clear
operation. The normal display returns.
Example:
Display after clearing
programmed operation
above
through start
OI-915-18-EG