915_TCB-EXS21E.book Page 17 Wednesday, August 1, 2007 1:26 AM
STEP 4
Press the HOLIDAY button to enter the holiday.
•
The normal display returns.
How to Disable the Timer Operation
To halt programmed operation for one week or more, you can disable all timer programs.
•
Once the timer has been disabled, programmed operations are not run until the below procedure is performed.
NOTE
•
During installation, the remote controller may be set to disable the timer for individual groups. In this state, the
timer is disabled only for the selected group, therefore press the GROUP button to confirm which group is
selected.
Hold down the TIMER OFF button for more than
2 seconds
•
appears on the display. The timer is
disabled from the next scheduled program.
OI-915-17-EG
To turn the timer back ON, hold down the TIMER
OFF button for more than 2 seconds
•
goes out and the timer is enabled from
the next scheduled program.
EG
17