Toshiba TCB-EXS21TLE Mode D'emploi page 13

915_TCB-EXS21E.book Page 13 Wednesday, August 1, 2007 1:26 AM
STEP 4 Press the SET button to copy.
• Press the SET button and the program schedule
marker (
STEP 5 Select other copy destination days if desired.
• You can copy the selected source day program into
other days by repeatedly pressing the DAY button to
select a day of the week followed by the SET button
to set it.
NOTE
• Pressing the CLEAR button extinguishes the
program schedule marker (
copy operation.
STEP 6 Press the PROG. COPY DAY button to enter the
copied program in the selected days.
• The normal display returns.
NOTE
• If a program already exists in the copy destination day, the newly copied program overwrites the existing
program.
• If you accidentally copy over a program in the day program copy mode, holding down the CANCEL
button for more than 2 seconds returns the program to the point prior to pressing the PROG. COPY DAY
button in STEP 1. (All changes and copy operations made up until that point are cleared.)
OI-915-13-EG
) will be displayed.
) and cancels the
EG
13