Focus Adjustment - Ltc Audio VP2000 Manuel D'utilisation

CONTROLS AND CONNECTORS (FIG. 1)
1. Ventilation input
2. Level stand adjustment
3. IR receiver
4. Focus lens
5. Keystone
6. Power switch
7. Input terminals
8. Hot air outlet
9. Speaker
10. Level stand adjustment
11. Projector mounting holes
12. Label
13. Cool air intake for ventilation
TOP PANEL CONTROLS (FIG. 2)
1. Source
Choose the input signal such as AV, YPbPr, HDMI or PC.
2. Directional keys
Move upwards, downwards, left and right in the menu
3. Menu
Access to the menu
4. Power button
Press to turn the unit on and off. This button has the same function as the power button on the remote
control.
5. Indicator light
Red: Standby mode
Blue: Working
INPUT TERMINALS (FIG. 3)
Y/Pb/Pr
AV
L-Out, R-Out
L-In, R-In
VGA
HDMI 1/2
USB 1/2

FOCUS ADJUSTMENT

Turn the lens clockwise or counterclockwise to the projector until the picture is sharp.
KEYSTONE
If the projected picture has keystone distortion, correct the image with keystone adjustment. The image gets a
trapezoidal shape when the screen or projector is not level. Please reposition the projector to improve its angle
to the screen. However, the circumference of the image may not be focused.
VP2000 (10-6006)
Component video input
Video input
Audio output
Audio input
VGA input
HDMI signal input
Connect USB flash drive
www.ltc-audio.com
5