Operation - Unold 18590 Notice D'utilisation

CAUTION: Do not open the lid while the water is boiling. If the
kettle jug is filled beyond its maximum capacity, boiling water
can splash out. The appliance becomes very hot during operation
and maintains the heat during some time after disconnection.
Never open the housing of the appliance. This can result in electric
shock.
The kettle is only to be used with the stand provided.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

OPERATION

1. Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children - danger of suffocation!
2. Plug the lead of the base into the mains.
3. Remove the kettle from the base. Press the opening button on top of the lid.
The lid is released and can be opened.
4. Fill the kettle with water (minimum 0.25 litres, maximum 1.2 litres, mark
MAX). For the first use fill up to the mark MAX.
CAUTION!
Do not overfill. If the kettle is overfilled, boiling water may be ejected.
5. Close the lid until by pressing the black button on the lid until it clicks into
place. The locking prevents accidental opening during pouring out.
6. Place the kettle level on the base in order to establish the contact with the
power connection.
7. Switch on the kettle by pressing the key downwards. The inside of the kettle
will be lighted (control lamp function).
8. Pour away water from first boiling.
9. The kettle is automatically switched off when the water boils and the control
lamp turns out. However, boiling can be stopped by operating the I switch.
ATTENTION:
The automatic shutoff only works, if the lid is correctly closed.
10. After an adequate cooling-off period the water can once again be brought to
boil by pressing ON the switch.
16
Copyright UNOLD AG | www.unold.de