Bresser National Geographic 90-81000 Guide De Démarrage Rapide page 16

21. 30 seconds after you've made your adjustments, the laser beam will begin
blinking and enter countdown mode. This is your indication to leave the cov-
erage area within one minute.
22. Close bottom cover.
Viewing fi les on your computer via USB connection
1. Make sure the camera's power switch is in the "OFF" position.
2. Plug the larger end of the USB cable into an available USB port on your
computer.
3. Plug the smaller end of the USB cable into the camera's side panel.
4. The camera will automatically power "ON" and display the word USB on the
LCD display.
5. At the same time, your computer will recognize the camera as a Removable
Storage device. You will fi nd it under "MY COMPUTER".
At this point you have several options:
View your images or play your videos:
Click on the Removable Storage device and then drill down to the fi le you want to
see and double click on the fi le name.
Save your images and videos:
Highlight the fi le or fi les you want to save and drag them to your hard drive.
Delete your images and videos:
Highlight the fi les or fi les you want to delete and press the [DELETE] button.
Erase all fi les and reformat you SD memory card:
Right click on the Removable Storage device under My Computer and select
"FORMAT" then click "START". You will receive a Warning message press [OK].
Then click "CLOSE" to exit.
NOTE: Make sure before you format that you are certain it is the Removable Stor-
age device for the camera. Once you're done, simply unplug the cable from both
your computer and the camera. The camera will turn off automatically.
16