Rittal CMC III online comfort handle VX Notice D'installation Et D'utilisation page 10

Installation and operation, Service
– Green LEDs light continuously: CAN bus status "OK".
– Red LEDs light continuously: CAN bus status faulty.
EN
Display of the status change on the multi-LED of the Processing Unit.
– Continuous green light: All units attached to the CAN bus have the "OK" status.
– Continuous orange light: At least one unit attached to the CAN bus has the "warning" status.
– Continuous red light: At least one unit attached to the CAN bus has the "alarm" status.
If the installation is not successful: see section 1.1.
5.3 Settings
"Access" mode is activated as standard for the comfort handle. The comfort handle is configured
under the Observation index tab on the CMC III PU or PU Compact web interface.
Further information concerning this topic is contained in the main guide at www.rittal.com (see sec-
tion 1.1).
To determine whether any software updates are required: see www.rittal.com or contact
Rittal Service (see section 6).
6 Service
For technical questions, please contact:
Tel.: +49 (0) 2772/505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49 (0) 2772/505-1855
E-mail: service@rittal.de
10 Rittal CMC III online comfort handle VX