Stoov The Ploov Manuel page 2

EN | Product information
The intended use of this product is to provide warmth
to people. The product includes an infrared heating
element and a li-ion battery. The battery can be charged
via the included magnetic USB cable.
WARNING: Read this manual carefully
before you start to enjoy the heat.
• Only use a certified 5V USB wall charger with 2A
current or more.
• Using a different charger may cause irreparable
damage to the product, the environment and can be
dangerous.
• Use with caution and common sense.
• Do not use if you are over- or insensitive to heat.
• Do not let children under 8 years use this product
without supervision.
• Keep the product away from equipment that gene-
rates heat.
• Protect the product against water and other fluids.
• Store the product inside.
• Check the product for damage before use.
• Do not use, if the product or battery is damaged.
• Do not use the product, if it is wet.
• Do not incinerate the product or the battery.
• Do not pierce the product or the battery.
• Do not fold the product.
1
• Do not open the product or battery.
Instructions for use
Stoov® Smartlabel
Power Button
Front
Heating indicator lights
Charging indicator light
Charging
Connect the magnetic connector of the charging cable to
the backside of the Stoov® Smartlabel. Connect the
charging cable to the USB wall charger.
The charging indicator light indicates the charging status,
when the charging cable is correctly attached:
• The light is blinking = The battery is charging and/or
the product is in use.
• The light is on = The battery is full and the product is
not in use.
Disconnect the charging cable and unplug the wall mount
from the socket, when the battery is fully charged. Please
note, the total charging time depends on the capacity of
the USB wall charger. See technical specifications for the
Back
Magnetic charging connector