Installing Your Dryer; Unpacking Your Dryer; Top Cover; Basic Requirments - Samsung DV48H7400E Série Mode D'emploi

installing your dryer

unpackInG your DryEr

Unpack your dryer and Inspect it for shipping damage. Make sure you have received all of the items
shown below. If your dryer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG (726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the dryer.
Packing materials can be dangerous to children. Keep all packing material (plastic bags, polystyrene,
Warning
etc.) well out of children's reach.
Do not move the product while holding the front part of the top cover of the dryer.
caution - This may cause the cover to be separated and result in injury.
tools needed
pliers
level
parts supplied (dV48(5)h7400e(g)* only)
"y"- connector

baSIc rEquIrmEntS

Make sure you have everything necessary for proper installation
• A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
• A POWER CORD for electric dryers (except in Canada).
• GAS LINES (if installing a gas dryer). The gas lines must meet national and local codes.
• EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
DV7000HA DRY_DV48H_USER MANUAL_DC68-03170J-08_EN.indd 7
control panel

top cover

door
Filter
Frame Front
cutting knife pipe wrench (gas only)
phillips screwdriver
hose water
English - 7
[ bacK ]
duct exhaust
duct tape
short inlet hose
nut drivers
Wrench
2016/2/25 16:21:05