Geemarc AmpliPOWER 40 Mode D'emploi page 10

Setting up
4- Tone/Pulse switch (T/P)
The Tone/Pulse switch is factory pre-set to
Tone position (T). In the UK,all telephone
exchanges now use Tone dialling.If your phone
does not dial out, it is probably being used from
an older private switch- board (PBX). In this
case,theTone/Pulse switch must be moved to
Pulse.
5- Time break recall switch (270/100)
For the UK, the TBR switch is factory pre-set to
100ms. It can be switched to 270ms for other
locations or PBX's.
6- Hotel message waiting switch
These are used with the new services provided on
hotel network. A switch located behind your
phone allows to set ON the hotel message waiting
function.When the switch is setting ON and when
you receive a message, the red light is
10