Playable Media; Region Management Information; Firmware Updates - Panasonic DMP-BDT281 Mode D'emploi

Playable media

BD-Video: Video
BD-RE: Video, JPEG, MPO*, AAC, ALAC, DSD,
FLAC, MP3, WAV, WMA
BD-R: Video, MKV, Xvid, AAC, ALAC, DSD,
FLAC, MP3, WAV, WMA
DVD-Video: Video
DVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid,
JPEG, MPO*, AAC, ALAC, DSD, FLAC, MP3,
WAV, WMA
DVD-RW/+R/+RW/+R DL : Video, AVCHD
Music CD : Music [CD-DA]
CD-R/CD-RW : MKV, Xvid, JPEG, MPO*, AAC,
ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA
USB devices (up to 4 TB) : MKV, MP4, MPEG2,
Xvid, JPEG, MPO*, AAC, ALAC, DSD, FLAC,
MP3, WAV, WMA

Firmware updates

Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet
via a broadband connection.
When a new firmware version is available, the
following message is displayed.
Firmware Update
New Version:
Current Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.jp/support/global/cs/
Yes
You can also download the latest firmware from
the following website and store it to a USB
device to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
8
(8) SQT1271
X.XX
No
OK
RETURN

∫ Region management information

The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
"ALL":
Example:
BD-Video
* [BDT281/280] [BDT181/180] [BDT168/167]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the
update takes place.
After the firmware is installed, unit will restart
and the following screen will be displayed.
e.g.,
The firmware was updated.
Current Version
≥ To show the firmware version on this unit;
[HOME] "Setup" "Player Settings"
"System Information"
≥ Downloading will require several minutes. It may
take longer or may not work properly depending on
the connection environment.
≥ If you do not want to check for the latest firmware
version, set "Automatic Update Check" to "Off".
[HOME] "Setup" "Player Settings"
"Firmware Update"
DVD-Video
2
only
: x.xx
RETURN
"System"
"Firmware Version Information"
"System"