Vacation Mode; Sabbath Mode; Energy Saving Mode - Thermador T24IR Série Guide D'utilisation Et D'entretien

en-us
Switching off
Press setup button.
All of the changed settings are stored.
Note:
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again
in the fascia.
Menus in the setup mode
The following settings can be made.
Menu
Temperature unit
Language
Sound

Energy saving mode

(eco function)

Vacation mode

If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode.
When Vacation mode is switched on, the following
settings are made:
The appliance works in energy saving mode.
■
The illumination is switched off.
■
The "super cooling" function is ended (if activated).
■
Switching on
Press Vacation button.
VACATION is displayed in the display panel.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
10
Possible setting
°C (degrees Celsius)
°F (degrees Fahrenheit)
English
French
Spanish
On
Off
On
Off

Sabbath mode

When Sabbath mode is switched on, the following
settings are switched off:
Super cooling (if switched on)
■
Acoustic signal
■
Interior light
■
Messages in the display panel
■
The background illumination of the display panel is
■
reduced
Buttons are locked
■
Switching on
1. Press and hold down the "super" button
on refrigerator compartment.
2. Press Vacation button.
3. Press "super" button and hold down for a further
3 seconds.
The VACATION symbol flashes on the display panel
and SABBATH is displayed.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Energy saving mode
If the energy saving function (eco function) is activated,
the appliance switches to energy saving operation. This
energy saving function is preset at the factory in order
to reduce energy consumption. The background
illumination of the fascia is likewise reduced.
Switching on
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (OFF) is displayed.
3. Press the setting button @, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
ECOis displayed in the fascia.
Switching off
1. Press setup button.
2. Press the selection button ¿, until ECO MODE
and the current setting (ON) is displayed.
3. Press the setting button A, in order to reset
the setting.
4. Press the setup button, in order to store the setting.