Alto Professional TX2 Série Guide D'utilisation page 47

TX215
System Type
Drivers
Amplifier
Horn Coverage
Frequency Response
Crossover Frequency
Max SPL
Equalization
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
Trademarks & Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other product
names, company names, trademarks, or trade names are those of their respective owners.
2-way active ported loudspeaker
Low-Frequency: 15.0" (381 mm) driver, 2.0" (51 mm) voice coil
High-Frequency: 1.0" (25 mm) neodymium compression driver, 1.0" (25 mm)
voice coil
600 watts , 300
(peak)
90º horizontal x 60º vertical
65 Hz – 20 kHz
(-3 dB)
2.2 kHz
119 dB @ 1 m
Contour switch with low- and high-frequency +3 dB boost
(1) XLR/TRS 1/4" (6.35 mm) balanced input
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, volume control knob, contour switch, ground-lift switch
(2) power LEDs (1 front panel, 1 rear panel), clip limiter LED
Connection: IEC
Voltage: 100 V, 110–120 V, or 220–240 V; 50/60 Hz, switchable
Fuse: 100–120V T4AL AC250V or 220–240V T2AL AC250V
Consumption: 260 W
Thermal, overload analog limiter/compressor
Injection-molded polypropylene, multi-angle for main or monitor
applications, metal grille, rubber feet, 2 handles
Standard 36 mm pole socket, wedge monitor
24.7" x 15.2" x 14.6"
627 x 386 x 371 mm
32.34 lb.
14.67 kg
, Class D power
(continuous)
(nominal)
(Line/Mic)
(both sides)
47