Alto Professional TX2 Série Guide D'utilisation page 45

TX210
System Type
Drivers
Amplifier
Horn Coverage
Frequency Response
Crossover Frequency
Max SPL
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
2-way active ported loudspeaker
Low-Frequency: 10.0" (254 mm) driver, 1.5" (38 mm) voice coil
High-Frequency: 1.0" (25 mm) titanium-diaphragm compression driver,
1.0" (25 mm) voice coil
300 watts , 150 watts
(peak)
90º horizontal x 60º vertical
75 Hz – 20 kHz
(-3 dB)
2.5 kHz
116 dB @ 1 m
(1) XLR balanced input
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, volume control knob
(2) power LEDs (1 front panel, 1 rear panel), clip limiter LED
Connection: IEC
Voltage: 100 V, 110–120 V, or 220–240 V; 50/60 Hz, switchable
Fuse: 100–120V T1.6AL AC250V or 220–240V T800mAL AC250V
Consumption: 150 W
Thermal, overload analog limiter/compressor
Injection-molded polypropylene, multi-angle for main or monitor
applications, metal grille, rubber feet, 1 handle on top
Standard 36 mm pole socket, wedge monitor
18.2" x 11.3" x 10.9"
462 x 287 x 277 mm
16.7 lb.
7.6 kg
, Class D power
(continuous)
(nominal)
(Line/Mic)
45