Accessories; Installation; Installation Area; Unpacking The Washing Machine - Rotel G5400CH Mode D'emploi

• ACCESSORIES

Transport Supply hose
hole plug for cold water

• INSTALLATION

Installation area

The machine should be installed taking the following into account:
o
The surface should be sturdy, dry and level
o
Avoid direct sunlight
o
Ensure sufficient ventilation
o
Room temperature must be above 0℃
o
Keep far away from heat resources such as coal or gas.
Warning:
o
Stability is important to prevent the product from moving!
o
Make sure that the product is not on the power cord.

Unpacking the washing machine

o
Remove the cardboard box and Styrofoam packing.
o
Lift the washing machine and remove the base packing. Make
sure the small piece of triangular foam is removed at the
same time as the bottom one. If not, lay the unit down on its
side, then remove the small foam from the bottom of the unit
manually.
o
Remove the tape securing the power supply cord and drain
hose.
o
Remove the inlet hose from the drum.
Warning:
o
Packaging material (e.g. films, Styrofoam) can be dangerous for children.
o
There is a risk of suffocation! Keep all packaging well away from children.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Supply hose Drain hose
for hot water (optional
(optional) support)
99
Owner's
manual