Rotel G5400CH Mode D'emploi page 116

Description (LED)
Description
E30
E10
E21
E12
Others
Note:
o
After checking, switch the appliance back on. If the problem occurs again, contact
the service.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Reason
Door is not closed properly.
Water injecting problem while
washing.
Water draining taking too long.
Water overflow.
Others.
Reason
Door is not closed properly.
Water injecting problem
while washing.
Water draining taking too
long.
Water overflow.
Please try again. Call the service line if the problem persists.
116
Solution
Close the door and restart. Check
that no clothes are stuck.
Check whether the water pressure
is too low. Straighten the water
pipe.
Check whether the inlet valve
filter is blocked.
Check whether the drain hose is
blocked.
Restart the washer.
Please try again. Call the service
line if the problem persists.
Solution
Close the door and restart.
Check that no clothes are
stuck.
Check whether the water
pressure is too low.
Straighten the water pipe.
Check whether the inlet valve
filter is blocked.
Check whether the drain hose
is blocked.
Restart the washer.