Use control panel to control your cooker hood (Fig. 4)
Power switch - when plug is contacted with power, please touch this symbol, and display light. Then
appliance is ready for work. The power is turned off when you touch it again.
Low speed
Medium speed
High speed
Lamp on / off
Clock/timer: you can adjust the time clock on display by it. When power switch in off, please touch
this symbol 6 seconds and there is "bi" sound, the clock of hour is flashing on display, then you can
increase hour by touching high speed symbol, or decrease by low speed symbol.
Then push clock symbol again, the clock of minute is flashing, you can adjust minute now by touch
speed symbol. Finally, push clock symbol in third time, the setting of clock finish.
When motor is running and you touch this symbol, 15 minutes delay is counting down on display. After
counting down, appliance will stop working automatically.
During counting down, you can push it again to cancel 15 minutes delay.
Power switch - when plug is contacted with power, please touch this symbol, and display light. Then
appliance is ready for work. The power is turned off when you touch it again.
Low speed
Medium speed
High speed
Lamp on / off
Clock: you can adjust the time clock on display by it. Please touch this symbol, the clock of hour
is flashing on display, then you can increase hour by touching high speed symbol, or decrease by low
speed symbol.
Then push clock symbol again, the clock of minute is flashing, you can adjust minute now by touch
speed symbol. Finally, push clock symbol in third time, the setting of clock finish.
After connecting the appliance to power supply touch
standby mode.
In standby mode, you can select the desired function:
- Touch this symbol to turn on the light. Lighting operates independently.
- Sensor reduces motor speed one level down
- Sensor increases motor speed one level up
- Touch this sensor to activate Booster function (Turbo). This function will be automatically disabled
after approximately 6 minutes, the hood automatically changes speed to level 1. If you need to use
the Booster function again, enable it after approximately 30 minutes, otherwise motor anti-overheat-
ing protection may be activated.
- During hood operation, the sensor activates hood off delay. After cooking, it is recommended that
the hood continued to run to remove fumes from the room after cooking. At the selected motor
speed, enable hood off delay, the hood will run for approximately 15 minutes, then turns off automat-
ically. This function does not turn off lighting.
- In standby mode, you can set the desired time on the display. In standby mode, touch and hold the
sensor for approximately 3 seconds, the hour digits will flash, then use
desired time. Touch
the desired minute value. Touch
OPERATION AND MAINTENANCE
symbol again, the minute digits will flash, then use
symbol again to confirm the time setting.
, the display lights up red, the hood is in
37
and
sensors to set the
and
sensors to set