Polar FA854 Mode D'emploi page 4

UK
Installation
Note: If the unit has not been
stored or moved in an upright
position, let it stand upright for
approximately 12 hours before
operation. If in doubt allow to
stand.
1. Remove the appliance from the packaging.
Make sure that all protective plastic film and
coatings are thoroughly removed from all
surfaces.
2. To optimize performance and longevity, ensure
a minimum clearance of 2.5cm is maintained
between the unit and walls and other objects,
with a minimum 5cm clearance on the top.
NEVER LOCATE NEXT TO A HEAT SOURCE.
Note: Before using the appliance
for the first time, clean the
interior with soapy water.
• Level the appliance by adjusting the screw
feet.
Operation
Storing Food
To get the best results from your POLAR appliance,
follow these instructions:
• Only store foodstuffs in the appliance when it
has reached the correct operating temperature.
• Ensure gastronorm bays are full at all times,
even if the gastronorms are unused or empty.
Empty bays will greatly reduce efficiency of the
appliance.
• Use the spacer bars provided to fill any gaps
(they are not required to support each GN
pans).
• Do not obstruct the fans inside the appliance.
Note: The appliance is not intended for the
long term storage of food.
4
FA854_FA855_FA856_FA857_DA680_ML_A5_v2_20210617.indb 4 FA854_FA855_FA856_FA857_DA680_ML_A5_v2_20210617.indb 4
Turn On
1. Ensure the power switch is set to [O] and turn
on at the socket.
2. Switch on the power switch [I]. The current
temperature within the appliance is displayed.
Set the Operating Temperature
1. Press the SET button 3 seconds. The display
will flash.
2. Press the or buttons to display the
required temperature.
3. Press the SET button to store the temperature.
Manual Defrost
Press and hold the defrost button "aux" for 2
seconds to begin a manual defrost. The defrost
light illuminates.
2021/6/17 11:17 2021/6/17 11:17