System Settings - Sunstech CA107QCBT 32GB Manuel D'utilisation

Setting up for the first time
Charging your device：
For first-time use, you need to charge the device for ten hours.
After that you can recharge the device as needed.
Connect the DC-in jack to your device and plug the AC adapter into any AC outlet.
Also, you can charge the unit through of the micro USB.
【TIPS】:
1. This device adopts built-in polymer battery. Only the specified charger should be
used.
2. It is normal for the device's surface to become warm during charging or long
periods of use. All devices are factory tested before release.
3. If you do not use this set for a long time, please charge/release it once
one month to avoid deep discharge.

System Settings

Wireless & Network:
Wi-Fi-: Press Wi-Fi to turn ON/OFF
Wi-Fi settings:
Press Wi-Fi settings, then the device will automatically search the available
Wi-Fi signals.
Select the network you want to connect with.