of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
DESCRIPTION
(see figure on pag. 3)
A
Thermostat
B
Switches
C
Comfortemp button
D
Cord holder
E
Wheel
USE
Electrical connection
Before plugging the radiator into the outlet, check that the
voltage of your outlet electricity supply corresponds to the
value V indicated on the appliance and that the socket and
power line are appropriately dimensioned.
"Easy wheel" sytem
Turn the radiator upside-down on a rug or a
soft surface in order to prevent damaging the paint finish.
Fully unfold the castors by turning them outwards (Fig.1).
Turn the radiator back to its upright position.
Important!
When in use, the radiator should always be kept vertical
(wheels at the bottom, controls at the top). Any other posi-
tion could be dangerous!
INSTRUCTIONS FOR USE
Switching on - off
Turn the thermostat dial clockwise to maximum.
Turn on both switches. The lights on the switches remain on
irrespective of the cycle set by the thermostat.
When the room reaches the required temperature, turn the
dial counter clockwise slowly until you hear a click.
The appliance will come on and go off automatically to main-
tain the required temperature.
To turn the appliance off completely, turn the thermostat to
and unplug from the outlet
minimum
ONLY
Economiser
For economy of use, the switches can be used singly:
-
button in position «MIN» only = minimum power (light
on)
-
button in position «MED» only = medium power (light
on)
-
buttons in both positions «MIN» and «MED» = maxi-
mum power (lights on)
Using the thermostat
The thermostat operates on the basis of room temperature
and not radiator temperature. To reduce the temperature,
turn the thermostat dial anti-clockwise; to increase the tem-
perature, turn it clockwise.
Frost protection function
With the thermostat in position
the appliance maintains the room at a temperature of about
5°C (41°F), preventing freezing with minimum energy con-
sumption.
COMFORTEMP BUTTON
With the "COMFORTEMP" button and both switches pressed,
the appliance is automatically set to reach and maintain what
is considered to be the comfort temperature.
A green light comes on to indicate activation of "COMFOR-
TEMP". In this mode the temperature is automatically set only
by the "COMFORTEMP". To deactivate this mode and return to
thermostat operation, press the COMFORTEMP button again.
MAINTENANCE
Before carrying out any operation on the radiator, unplug
from the electric outlet and wait for it to cool.
The oil-filled electric radiator requires no particular mainte-
nance. It is sufficient to remove the dust with a soft, dry cloth.
Never use abrasive powders or solvents. If necessary remove
concentrations of dirt using a vacuum cleaner.
10
and the switches pressed,