Publicité
Les langues disponibles
Les langues disponibles
5.) Now place the appliqué with the coated-side facedown on the chosen position and cover
appliqué with a slightly wet cloth. Eventually Iron it onto the fabric step by step –
depending on the fabric's thickness this process can endure about app. 6-10
seconds/position.
6.) The appliqué is now attached to the fabric and will even bear up against delicate washing
machine programs.
7.) The mini flat iron wasn't used properly if either the appliqué starts falling off the fabric or
brown parts occur on the fabric.
8.) Un-plug device after usage and let it cool down.
9.) To prevent fabric from fraying, we advise finishing the project off with a zigzag stitch.
Hint:
Due to the small size of the iron it's even possible to work with curved or hard to handle
material (e.g. sneakers, back of books). Also try to apply appliqués to unusual surfaces like
wood, felt or even outlets.
Caution:
The smaller attachment can reach a high working temperature of 400 degrees (+/- 25
degrees), the larger attachment 370 degrees. If choosing a very sensitive fabric, always
select the larger attachment!
Not every fabric is suitable for the mini flat iron. Faux leather, polyester and other heat-
sensitive fabrics are not able to stand the high temperatures of this device!
Decorating with strass stones
Instruction
Before setting the stones draw your motive with a pencil on the material, marking a dot for
each stone.
1. Choose the picker according to the size of the stones you are going to use and screw it
into the taper of the iron.
For PEBARO stones use the PEBARO pickers P2 to P5 (P2 for 2mm stones, P3 for 3mm
ones, etc.).
The other pickers are for other stones available on the market, such as Swarovski SS6,
SS10, SS12, SS16, SS20, SS36.
Advice: In order to enable you decorate with any crystal stone there are further 2 pickers
without hollow, which fit any size.
2. Plug the setting iron into the power socket. After 3-4 minutes it is ready for gluing the
stones.
8
Publicité
