Care And Maintenance - Climadiff CLS50 Notice D'utilisation

Cave de service mono compartiment
Masquer les pouces Voir aussi pour CLS50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Criss-crossing types
Top-to-bottom neck-to-neck:
Note the difference in depth!
Top-to-bottom neck between bottle bodies:
Increased loading.
Examples of serving temperatures
Opinions vary, and the ambient temperature too, but many people agree on the following:
Prestigious Bordeaux wines – Reds
Prestigious Burgundy wines – Reds
Prestigious dry white vintages
Light, young, fruity reds
Provence rosés, primeur wines
Dry whites and vin de pays reds
Vin de pays whites
Champagnes
Sweet wines

8. CARE AND MAINTENANCE

Before cleaning your appliance (something that should be done regularly), disconnect it by removing the
plug or by pulling the fuse on the circuit.
Before using your appliance for the first time and regularly after that, we recommend that you clean the
inside and outside (front, side and top) with warm mixed with a gentle cleaning product. Rinse with clean
water and allow to dry before reconnecting. Do not use solvents or abrasives.
When the appliance is switched on for the first time, there may be a residual odour. In that case, runt the
appliance empty for a few hours at the coldest possible temperature. The cold will kill any odours.
In case of a power cut
Most power cuts are resolved within a short time. A power cut of 1 or 2 hours will not affect the
temperature in your cabinet. To protect your wines during a power cut, avoid opening the door as much
as possible. During very long power cuts, take the necessary measures to protect your wine.
 If the appliance is disconnected or if there is a power cut, you must wait three to five minutes before
re- starting. If you try to re-start before this time, the compressor will only re-start after 3 to 5 minutes
(if the temperature requires).
 When switching on for the first time or following a prolonged shutdown, it is possible that when re-
starting, the temperatures selected and those displayed are not the same. This is normal. It will take a
few hours before they stabilize.
16 – 17°C
15 – 16°C
14 – 16°C
11 – 12°C
10 – 12°C
10 – 12°C
8 – 10°C
7 – 8°C
6°C
40

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cls52

Table des Matières