Climadiff CLS50 Notice D'utilisation page 33

point of sale of any damage. In such a case, keep the
packaging.
 It is recommended that the appliance be allowed to settle for at
least 24 hours before connecting the electrical power supply, so
that the compressor fluid feed is correct.
 Proper air circulation is necessary to avoid overheating. To
ensure sufficient
recommendations provided.
 In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
recommendations.
 The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
 Check that electrical sockets remain accessible when the
appliance is installed.
Power saving
To limit the electricity consumption of your appliance:
 Install it
instructions").
 Leave the doors open as little time as possible.
 To ensure that the appliance operates properly, clean the
condenser regularly (see "Maintenance").
 Regularly inspect the door seals and ensure that they are still
closing properly. If this is not the case, contact your after-
sales service.
Trouble shooting
 Any electrical work should be carried out by a qualified and
skilled technician.
ventilation,
condenser).
in an appropriate
observe the
Observe the
place (see
installation
installation
"Installation
33