Problem
Laundry remains wet at the end
of the programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the
machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.4.2
A
CAUTION:
dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.
26 / EN
Reason
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
If you cannot eliminate the problem although you follow the instructions in this section, consult your
Solution
• Use recommended amount of detergent.
Washing Machine / User's Manual