General Guidelines; Getting Started - Velleman HQ POWER HQSA1011 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
3.

General Guidelines

Refer to the Velleman
manual.
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
6
5.
Use
5.1

Getting Started

Installation
Install the appliance on a flat, non-slippery surface.
Charging
The speaker is powered by a built-in rechargeable battery, which must be fully charged
before first use. To do so, connect the appliance to a powered USB power source using
the included USB cable.
The charge LED on the display will burn red. When the battery is fully charged, the LED
will switch off.
Note that a rechargeable battery has a limited number of charge cycles. Battery life and
number of charge cycles vary according to use and settings.
Average charging time is 3 to 5 hours. To prolong battery life, do not charge
continuously for more than 5 hours.
V. 02 – 04/07/2019
®
Service and Quality Warranty on the last pages of this
LED display
microSD port
USB port
charging input
aux input
volume
HQSA1011
7
8
9
10
11
12
4
on-off
RGB LED
mode
previous/backward
play/pause
next/forward
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières