Sewing A Buttonhole - SOLAC SW8220 Mode D'emploi

BUTTONHOLE SEWING
- You can sew buttonholes by using the buttonholepresser foot acces-
sory. We recommend that sew a few pieces before you sew actual
material.
Install the buttonhole presser foot.
1. Raise the presser foot and lift the needle to its highest position.
2. Raise the presser foot lifter and remove the presser foot.
3. Hold the buttonhole presser foot and place it under the holder. Align
the presser foot pin so it lines up right under the holder.
4. Lower the presser foot to lower the presser foot holder.
4
5. Raise the presser foot lock lever to secure the presser foot to the
presser holder.
6. Raise the presser foot lifter, pass the upper thread and the bobbin
thread through the buttonhole presser foot so they come out from the
side.

Sewing a buttonhole

1. Using tailor 's chalk, mark the position of the buttonhole on the fabric.
2. Attach the buttonhole presser foot and place the fabric beneath the
presser foot.
3. Draw both of needle and bobbin thread to the left. Slider frame of
buttonhole is removable. Move the slider frame toward you so that the
top mark on the slider meets the start mark.
4. Choose the buttonhole length as per your requirement by stopping
slider frame movement. Please see the following picture.