Safety Instructions; General Guidelines; User Manual - Velleman LABPS3010 Mode D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
2.

Safety Instructions

Keep this device away from children and unauthorized users.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
Never put objects filled with liquids on top of or close to the device.
DO NOT disassemble or open the cover under any circumstances. Touching live wires can cause
life-threatening electroshocks. There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
Always connect the device to an earthed power socket.
Caution: device heats up during use. Make sure the ventilation openings are clear at all times.
For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings. Place the
device on a flat, heat resistant surface, do not place the device on carpets, fabrics...
Always disconnect mains power when device not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Do not use the device when damage to housing or cables is noticed. Do not attempt to service
the device yourself but contact an authorised dealer.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
The device enjoys optimal protection thanks to the short-circuit protection and the current-limiting point.
The power loss in case of short circuit is limited thanks to the protection circuit that controls the power loss
of the transistors in the power supply. This feature keeps the device from being damaged. The device will
automatically go into the current-limiting mode, which means that the current-limiting point (max. ± 12 A)
is installed. Nevertheless, the short circuit should be repaired as soon as possible in order to prevent wear
and unnecessary power consumption.
The output will be cut off if the short-circuit occurs between the positive and the negative output terminal,
which prevents power loss. The device will resume normal operation when the problem has been solved.
This device is a large power source. The device should be well-ventilated when working at max. power in
order to avoid overheating. Keep in mind that the surface of the heat sink is too hot to touch when the
device is being used at max. power.
V. 01 – 04/09/2014
LABPS3010

USER MANUAL

3 ©Velleman nv