Maintenance And Cleaning; Technical Data - Kerbl Heat Box 16278 Mode D'emploi

5. Maintenance and cleaning

CAUTION!
Risk of physical injury to people and animals and material damage
• only perform maintenance and cleaning work when the mains plug is disconnected
When carrying out cleaning and maintenance work, note the following instructions:
• keep the device free from dust and soiling
• only clean the device with a soft cloth or damp towel The cloth or towel should be free
of petrol and/or other solvents, since these can attack or damage the thermal container.
• never immerse the thermal container in water or clean it with a water jet

6. Technical data

Article number / type designation:
Voltage:
Heating output:
Protection class:
IP code:
Dimensions:
Weight:
CE-symbol / CE-conformity declaration
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental require-
ments and other relevant stipulations and regulations. The CE mark confirms compliance with the Directives of the European Union.
Electrical waste
It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult the relevant
regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on the disposal
of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants free of charge, or
returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any possible harmful impacts on humans
and the environment.
16278
12 V DC
36 watts
III (SELV)
IPX4
l 15 x w 16 x h 17.5 cm
1.5 kg
8