Epson TM-S2000MJ Manuel De L'utilisateur page 19

Printout is faint
When printout is faint, the print head may be dirty. See "Cleaning the Print Head" on
page 17 to clean the print head.
Scanned data or reading result of the magnetic ink characters is not normal
❏
When the scanned data is not normal, the glass of scanner may be dirty. See "Cleaning
the Scanner" on page 18 to clean the glass of scanner.
❏
When the magnetic ink characters cannot be read normally, the MICR head may be
dirty. See "Cleaning the MICR Head" on page 18 to clean the MICR head.
Paper or ID card is jammed
When cut sheet paper is jammed
Depending on where the paper is jammed, open the MICR cover or scanner cover, and
remove the jammed paper.
To open the MICR cover, pull the MICR cover open lever and open the MICR cover by
pulling it outward. (See illustration L.)
To open the scanner cover, pull the scanner cover open lever and open the scanner cover
by pulling it outward. (See illustration J.)
When an ID card is jammed
1. Pull the scanner cover open lever and open the scanner cover by pulling it outward.
(See illustration J.)
2. Remove the jammed ID card.
3. Close the scanner cover firmly until it clicks in place.
TM-S2000MJ User's Manual 19
English