Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly and Operating Instructions
Group pushbutton
Note
Group selection can only occur in operating mode.
The group pushbutton may be used to select up to 10 channels. Operation of the
individual channels is indicated by the relevant LED lighting up.
Channel
1-5 and central command 1-5
6-10 and central command 6-10
1-10 central command
Note
You can note the programmed groups on the label under the see-
through cover.
If you press the group button for 3 seconds, the order of the group se-
lection changes.
Operating mode
The time and the current operating mode, e.g. HOLIDAY, can be seen on the
display.
OK button
When the OK button is pressed, the currently displayed values are saved.
+/- Buttons
The following features can be operated using the + and - buttons:
• Menu -> Change setting
• AUTO mode -> Request information
• + Button -> Next automatic switching time s
• - Button -> Next automatic switching time t
• - Button and OK button -> Astro time t
MENU button
By pressing the MENU button, you can see an overview of the menu or the
operating mode.
The currently displayed values are not saved.
32
LED colour
green
red
orange
Publicité
Table des Matières
