Removing Appliance; Check The Installation; Drain Installation - Gaggenau VK 230 714 Instructions D'installation

Masquer les pouces Voir aussi pour VK 230 714:

Notice d'utilisation (76 pages)

Table Des Matières

Table des Matières

Les langues disponibles

behind the appliance. The socket outlet must still

be accessible after installation.

Check the Installation

Before you plug in an electrical cord

WARNING:

or turn on power supply, make sure all controls

are in the OFF position.

Remove everything from the cooktop surface. Clean

cooktop surface with cooktop cleaning creme.

Switch on the circuit breaker.

Verify that elements function properly.

Drain installation

The device is intended to be permanently connected

to the water outlet, but can also be installed without a

permanent connection using special accessory

AG 060 000.

Note: Keep the bottom drain valve in the lower cabinet

accessible.

Possibilities for drain installation:

▯

Sewage connection present in lower cabinet:

Fixed connection without free falling distance

according to DIN 1986 Part 1. A check valve must

be installed.

Recommendation: AG 050 000 Drain installation

set (available separately as a special accessory).

▯

Sewage connection present in lower cabinet:

Fixed connection with free falling distance

according to DIN 1986 Part 1. A check valve

should be installed.

Recommendation: AG 050 000 Drain installation

set (available separately as a special accessory).

▯

No fixed connection present in lower cabinet:

Drain in water-collecting container (e.g. bucket).

Only possible with AG 060 000 Drain installation

set (available separately as a special accessory).