Bosch B36CT Série Notice De Montage Et D'utilisation page 7

Ventilation
Never cover or block ventilation openings.
Installing the door handle
Fit the handle vertically onto the pre-assembled
1.
bolts.
The holes in the handle must face up and
Note:
down.
Use a 2.5 mm Allen wrench to tighten the pre-
2.
assembled screws clockwise in the handle from
the top and bottom.
Installing the drawer handle
Insert the handle horizontally onto the pre-
1.
assembled bolts.
The holes in the handle must be facing down.
Note:
Installation and connection en-us
Use a 2.5 mm Allen wrench to tighten the pre-
2.
assembled screws in the handle clockwise from
the bottom.
Aligning the appliance
9
CAUTION
To avoid damage to the floor, always move the
■
appliance with the height-adjustable feet
screwed upwards.
The two front height-adjustable feet must
■
always be in contact with the floor to avoid the
appliance from rolling or tipping when the door
is opened.
Rollers are located under the appliance for easy
movement and alignment:
Place the appliance vertically on a firm, level
1.
floor.
Using a wrench, screw down both of the front
2.
height-adjustable feet so that they touch the floor.
Compensate for floor unevenness with the front
3.
height-adjustable feet.
To align, use a level.
Note:
13
7