Bosch B36CL SN Série Notice De Montage Et D'utilisation page 7

Ventilation
Never cover or block ventilation openings.
Installing the door handle
Fit the handle vertically onto the pre-assembled
1.
bolts.
The holes in the handle must face up and
Note:
down.
Use a 2.5 mm Allen wrench to tighten the top and
2.
bottom pre-assembled screws clockwise.
Installation and connection en-us
Installing the drawer handle
Fit the handle horizontally onto the pre-assembled
1.
bolts.
The holes in the handle must be facing down.
Note:
Use a 2.5 mm Allen wrench to tighten the bottom
2.
pre-assembled screws clockwise.
Aligning the appliance
9
CAUTION
To avoid damaging the floor, always move the
■
appliance with the height-adjustable feet
screwed upwards.
The two front height-adjustable feet must
■
always be in contact with the floor to avoid the
appliance from rolling or tipping when the door
is opened.
Rollers are located under the appliance for easy
movement and alignment:
Place the appliance vertically on a firm and
1.
leveled floor.
Using a wrench, screw down both of the front
2.
height-adjustable feet so that they touch the floor.
Compensate for floor unevenness with the front
3.
height-adjustable feet.
To align, use a level.
Note:
13
7