Registres Réseau - ADEUNIS LoRaWAN DRY CONTACTS Guide Utilisateur

LoRaWAN DRY CONTACTS - Guide utilisateur / User guide version V2.0.0
320 1 Input TOR1 configuration:
321 1 Configuration of the input TOR2
322 1 Configuration of the input TOR3
323 1 Configuration of the input TOR4
3.4.2 Registres réseau
The list of registers below allows you to change the behaviour of the product application. This list is accessible in Provider mode following
execution of the ATT63 Provider command.
These registers must be handled with caution because they could cause problems of communication or of non-compliance with the legislation in
force.
Register
201 Spreading Factor (SF) by default
214 LORA APP-EUI (first part – MSB)
215 LORA APP-EUI (second part – LSB)
Description
Hexadecimal Default : 0x46
Bits 0 to 3: Type
• 0 = Disabled
• 1 = Input - Periodic Mode - High edge
• 2 = Input - Periodic Mode - Low edge
• 3 = Entrée - Periodic Mode - High and low edge
• 4 = Entrée - Event Mode - High edge
• 5 = Entrée - Event Mode - Low edge
• 6 = Entrée - Event Mode - High and low edge
• 7 =Output (Default state = 1/close)
• 8 = Output (Default state = 0/close)
Bits 4 to 7: Duration of the waiting period
• 0: None
• 1: 10 ms
• 2: 20 ms
• 3: 50 ms
• 4: 100 ms
• 5: 200 ms
• 6: 500 ms
• 7: 1 s
WARNING : if none of the TOR inputs is configured (value =
Disabled), the product will send the configuration frame 0x10
periodically (period defined by register 300).
Hexadecimal See details of register 320
Hexadecimal See details of register 320
Hexadecimal See details of register 320
Coding
Decimal Default: 12 (868) or 10 (915) depending on the reference of
the product
Min/max: 4 to 12
Unit: None
Hexadecimal Default: 0
Key encoded on 16 characters. Each register contains a part
Hexadecimal
of the key.
Used during the join phase in OTAA mode
E.g.:
APP-EUI = 0018B244 41524632
• S214 = 0018B244
• S215 = 41524632
• 8: 2 s
• 9: 5 s
• A: 10 s
• B: 20 s
• C: 40 s
• D: 60 s
• E: 5 min.
• F: 10 min.
Details
67 of 89
FR
EN