S.P.E. GREEN 6 Mode D'emploi page 10

User Manual
MONITOR 1
LINE EXAMPLE
(1) Pb 1Pb ST 48V / 35A
(2) 43,3 V 35A
(3) Ah= 8 Tc= 0h 15m 29s
(4) PhI1 CHARGE
(5) -- Messages
MONITOR 2
LINE EXAMPLE
(1) 43,3V 35A
(2)
(3) 7Ah PhI1 13m22s
(4) -- Message
MONITOR 3
LINE EXAMPLE
(1) N.CYCLE=
(2) C1ID=1PB ST_01.0001
(3) Vbif=1.68V/el = 40.4V
(4) Vbef=1.81V/el = 43.4V
(5) Ibif= 36A Ibef= 35A
(6) Tf =0h13m Tef=0h13m
(7) Ahf= 7 AhEf= 7
(8) -- Message
10
DESCRIPTION
Battery Technology, Type of Curve, Battery Charger Rating
Battery voltage and current
Ah charged, Charging Time in hours, min, sec
Current charging phase, battery charger STATUS
(e.g. phase = auto start A0, Status= BATTERY NOT
CONNECTED)
DESCRIPTION
Number of charge cycle and current charge phase
7 – Ph 1
E.g. : charge cycle 5 and Phase 3
Charging curve unique identification
Battery voltage at start of phase (Vbif) expressed first as element
voltage (V/el), then as absolute voltage (V)
Battery voltage at end of phase (current) (Vbef) expressed first
as element voltage (V/el), then as absolute voltage (V)
Current at start of phase (Ibif) and current at end of phase (Ibef)
Single phase time (Tf) and Overall charge time at end of phase
(Tef)
Ah supplied in the selected phase (Ahf) and overall charge Ah
(AhEf)
Indicates any faults occurring during the charge cycle
DESCRIPTION
Battery Voltage and Current Supplied
Active charge profile with indication:
• Phases complete (thick line)
• Phase in progress (flashing line)
•
Phases to execute (thin line)
Ah charged, Charging time in hours, min, sec
Possible fault or status messages
D00582-02