Paper Feeding Problems
■
If paper doesn't feed, remove it from the sheet feeder. Flip through the stack to
separate the sheets a little. Then reload the paper against the right side, and slide the
left edge guide against the paper (but not too tightly).
■
Don't load too many sheets at once. See your online User's Guide for information on
paper loading limits. Don't load paper above the arrow mark on the edge guide.
■
If paper has jammed, follow the steps on the LCD screen. If necessary, follow these
steps:
1.
Lift the scanner unit.
2.
Carefully remove any paper trapped inside, including any torn pieces.
Caution: Do not touch the flat white cable inside the product.
3.
Lower the scanner unit.
■
If documents don't feed correctly in the Automatic Document Feeder (ADF), make
sure the paper is not bent, folded, or curled. If paper has jammed:
1.
Open the ADF cover and remove any jammed paper.
Caution: Do not try to remove the paper without opening the ADF cover or you
could damage the mechanism.
ADF cover
Paper feeder
Printing and Copying Problems
29