Care And Cleaning; General Information - Electrolux EGT6242NVK Notice D'utilisation

10 www.electrolux.com
CAUTION!
Liquids spilt during cooking
can cause the glass to
break.
5.2 Diameters of cookware
Use cookware with
diameters applicable to the
size of burners.

6. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.
• Always use cookware with clean
bottom.
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
• Use a special cleaner applicable for
the surface of the hob.
WARNING!
Do not use knives, scrapers
or similar instruments to
clean the surface of the
glass or between the rims of
the burners and the frame (if
applicable).
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
6.2 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when
you replace the pan
supports to prevent the
hob top from damage.
2. The enamel coating occasionally can
have rough edges, so be careful
Burner
Rapid
Semi-rapid
Auxiliary
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
6.3 Removing pan supports
After cleaning of the hob, make sure that
pan supports are in a correct position. In
order toplace a pan support properly,
make sure that its arm agree with a hole
at the base of a burner, as shown on
below pictures. When one arm of a pan
support is longer, make sure that the
longer arm agree with a hole at the base
of a burner. This way, a pan support is
stable and fixed.
Pan support with all arms equal
Pan support with one arm longer
Diameter of
cookware
(mm)
180 - 260
120 - 220
80 - 180