Normal Use; Contents; Technical Data - AEG 97024 Mode D'emploi

Normal use

The charger is intended for charging open and
a variety of closed, maintenance-free lead-acid
rechargeable batteries (batteries) as found in cars,
boats, lorries and other vehicles, e.g.:
•
wet batteries (WET)
•
Lead-acid batteries (liquid electrolyte)
•
Gel batteries (gel-type electrolyte)
•
AGM batteries (electrolyte inside absorbed glass
matt)
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children should
be supervised to ensure they do not play with the
device.
This device is not intended for commercial use.
Any other use or modification of the device is con-
sidered improper and involves significant risks. The
manufacturer assumes no liability for damages due
to improper use.

Contents

Be sure to verify contents immediately upon ope-
ning the product. Check the product and all parts for
damage. Do not use a defective product or parts.
•
Microprocessor charger LT10
•
Clamp terminal connection cable
•
Ring terminal connection cable
•
Instructions for use
Accessories available for convenient connection:
•
Ring terminal connection cable
•
Battery connection cable for on-board outlet
Please include all relevant documentation to other
users!

Technical data

Model
Item number
Input
Input current
Output
Charging voltage
(max.)
Charging current
+/-10 %
Recommended
battery capacity
Ambient
temperature
Type of batteries
Safety class
English 19
LT10
97024
220 - 240 V AC
50/60 hz
max. 1.5 A
12 V DC / 24 V DC
14.7 V / 29.4 V
12 V: 2 A / 6 A / 10 A
24 V: 2 A / 6 A
2 - 200 Ah
-20 ºC till +40 ºC
lead-acid batteries (WET,
MF, AGM and GEL)
II