Domo PIET HUYSENTRUYT DO9076KR Mode D'emploi page 41

6. Make a quarter turn backwards with the release button so that the head falls down.
Then push the head back into its original position until you hear a click.
CLEANING
1. Always remove the plug from the socket before cleaning the device.
2. Never immerse the engine unit in a bowl of water or under running water. Clean
the engine unit with a soft damp cloth.
3. Disassemble all accessories according to the user instructions in the section
"Disassembling".
4. For quick cleaning, rinse the accessories under running water.
5. For thorough cleaning, wash, rinse and dry the accessories.
OPTIONAL ACCESSORIES: FITTING vEGETABLE CUTTER
Turn the device off, and take the plug out of the socket before you add, remove or
clean any accessories.
1. Open the lid by pressing the release button and push it upwards.
2. The connecting point for accessories is now shown.
3. Place the vegetable cutter at an angle of 25° to the connection point and tighten it
by making a quarter turn clockwise. You hear a click when it is securely fastened.
Your vegetable cutter is now in a perfect vertical position.
1
4. With the pushing rod you can safely place vegetables in the vegetable cutter.
5. Push the grater or slicer fully into the opening of the vegetable cutter.
6. You can choose between a cutter and two types of graters.
To remove the vegetable cutter, press the release button. Make a quarter turn
clockwise on the vegetable cutter. Clean all parts thoroughly and dry carefully before
using them again.
2
4
5
41
DO9076KR
3
6