FITFIU FITNESS BESP-100 Manuel D'utilisation page 35

INDOOR BIKE BESP-100
STEP 2. Screw the right pedal "R" and the left pedal "L" (1) to the right and left connecting rods (2) respectively. Secure
them with the two locknuts (3) and tighten them with a wrench.
1
2
3
3
2
1
STEP 3. Place the seat post (1) on the main frame (2) and secure it with the adjusting knob (3). Push the seat post
support bolt (4) through the seat post groove (1). Secure it with the nut and washer (5 and 6) and tighten the nut firmly
(to the right). Place the saddle (7) on the seat support (4). Adjust the angle as necessary, and then secure the seat to
the abutment by tightening the nuts on each side of the seat firmly with the wrench.
7
4
6
1
5
3
2
EN
35