Sony SCD-C555ES Mode D'emploi page 25

Selecting 2 channel playback mode
1
Press MENU.
2
Turn l AMS L until "2CH SPK MODE" appears
in the display.
3
Press l AMS L.
The playback mode appears in the display.
Front speakers
Playback
mode
Each signal outputs directly from front
2CH Direct
speakers. No signal outputs from the Sub
woofer.
2CH + SW
a
4
Turn l AMS L until desired mode appears in
the display.
5
Press l AMS L.
Note
You cannot operate this function when the player is in the CD or
Multi-channel playback mode. Operate this function when the
player is in the 2 channel Super Audio CD playback mode, the
disc tray is opened, or no discs are in the player.
Selecting Multi-channel playback mode
1
Press MENU.
2
Turn l AMS L until "MCH SPK MODE"
appears in the display.
3
Press l AMS L.
The playback mode appears in the display.
Playback Front
mode speakers
MCH Direct Each signal outputs directly from each
speaker.
5 – Large + SW Large
5 – Large Large
5 – Small + SW Small
FRT – Large +SW Large
FRT – Large Large
No – CNTR + SW Large
No – CNTR Large
Sub woofer
a
Center Surround Sub
speakers
speaker woofer
Large Large a
Large Large ––
Small
Small a
Small Small a
Small
Small ––
–– Large
a
–– Large ––
About "Large" or "Small" speaker
A "Large" speaker is a speaker that can reproduce bass
frequencies plentifully. If you select "Small" for the
surround speakers, the bass frequencies will come
from the front speakers and/or sub woofer.
For normal use, select "MCH Direct" or set all the
speakers to "Large" (ex. "5 – Large + SW," "5 – Large,"
etc.). If the sound is noisy or the Multi-channel
playback is not effective while playing a Multi-channel
Super Audio CD, change the settings of the speakers
concerned to "Small."
4
Turn l AMS L until desired mode appears in
the display.
5
Press l AMS L.
The output level balance setting display appears.
To set the output level balance, go to Step 4 in
"Adjusting the output level balance on the front panel
of the player" on page 26 or Step 2 in "Adjusting the
output level from the remote" on page 26.
To return to the normal display, press MENU.
Notes
• The Multi-channel management function does not work when
you select "MCH Direct" (you cannot set the output level
balance of each speaker).
• The front speaker setting is set to "Large" automatically when
you set the Sub wooer to "––."
25
US